Station
Assignment
5-18 Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
5. Click on the FB to program (the button turns from yellow to red).
6. Click the desired option from the blue parameter buttons on the right.
• Directory No – Assign a Primary DN key, Secondary/Phantom DN, Phantom DN Message Waiting,
or DSS key to this FB. See “Directory Number Sub-parameters” on page 5-19 for more details.
• CO Line – Assign FB as a CO, GCO or a Pooled Line. See “CO Lines Sub-parameters” on
page 5-20 for more details.
• Features – Assign ABR, ACB, DND, Short Flash, Long Flash, Privacy, Privacy Release, BGM Key,
Program Access, Account Code or Application Starting Key feature to this FB.
• Call Control – Activate Speed Dial, Release Button, Release/Answer, Cancel, Source Party,
Destination Party, CLID or Night Transfer from this FB.
• Call Forward – Set Call Forwarding assignments for this FB. Forward All Calls, Forward Busy,
Forward No Answer, Forward Busy No Answer, Forward Ext/All Call, Forward Ext/Busy, Forward
Ext/No Answer and Forward Ext/Busy No Answer are available selections.
• Park Page – Assign Call Park Orbit, All Paging, Group Paging, All Emergency Paging, Individual
Emergency Paging and Paging Answer Feature access to this FB.
• Call Pickup – Assign FB to a Pickup-Group, Pickup-Directed Terminal, Pickup-Directed Group,
Pickup-Directed DN, Pickup-Any External, Pickup-CO Retrieve, Pickup-Local Retrieve, Pickup-
Remote, Pickup-Directed DN Retrieve and Pickup-On Hold and Incoming.
• Door Lock – Enable FB to unlock Door Lock. See “Door Lock Sub-parameters” on page 5-20 for
more details.
• Voice Mail – Enable FB to Record or Pause/Resume Voice Mail.
• Attendant – Assign Out Dial, Attendant Answer, Overflow, Position Busy, Trunk Test, Attendant
Loop or Supervised Loop Key Attendant features to this FB.
• One Touch – Assign FB to be used as a One Touch button. See “Setting the One Touch Button” on
page 5-19. This feature is available only with CTX Software release 1.03 or higher and CTX
WinAdmin software 1.17 and higher.
• Blank – Clear FB assignment.
7. Click on one feature in the sub-parameter dialog box. If no other settings are required, the FB displays
an abbreviation for the selected feature.
...or if you select Directory No, CO Lines or Door Lock parameters, additional fields are required. See
the tables that follow for more details. Follow the directions in each pop-up dialog box.
8. To modify an existing feature button, double-click the feature button and make the change in the
appropriate dialog box that displays.
9. Click Submit.
To Next Page
Loading...
