Station
Assignment
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03 5-19
Station
Setting the One Touch Button
Follow the step above 1~8 above to assign an FB as a One Touch button. Then complete the following
steps:
1. Double click the key assigned as One Touch.
2. The following dialog box displays
This dialog box is used to define each button with the One
Touch Data.
3. Enter the One Touch data, then click OK.
Example 1: Setting up a One Touch button to transfer to
Voice Mail.
Select the Cnf/Trn from the white box on the right, CNF
displays in the One Touch Data field. Then type #407 after
CNF displays in the One Touch Data box. It adds Cnf/Trn
#407 in the One Touch Data. Click OK. Then click Submit.
Example 2: To originate a call from the PDN, select the FK
as 01 if the PDN is on the first key, then add the telephone
number next to FK01 in the One Touch Data box.
Cancel clears the changes and takes you back to the previous
page.
Directory Number Sub-parameters
FIELD DESCRIPTION
Primary DN 1. Select Ringing Assignment for Day1, Day2 and Night.
Possible values: No Ring, Immediate Ring, Delayed Ring1 and Delayed
Ring2.
2. Select Tone Pitch.
Possible values: 1~4 (default = 1)
Secondary/Phantom DN 1. Enter DN Number.
Possible values: Any string up to 5 digits
2. Select Ringing Assignment for Day1, Day2 and Night.
Possible values: No Ring, Immediate Ring, Delayed Ring1 and Delayed
Ring2.
3. Select Tone Pitch.
Possible values: 1~4 (default = 1)
Phantom DN Message
Warning
Enter Phantom DN No.
Possible values: Any string up to 5 digits
DSS Key Enter DSS Primary DN No.
Possible values: Any string up to 5 digits
To Next Page
Loading...
