Telephone Button Programming
300 Series Programs
13-62 Strata CTX Programming - Part 3:Telephone Button Programming 04/03
315
T1 Trunk Card
,
+ROG
This command assigns T1 Trunk Card Data to the system.
315-00 T1 Equipment
Location
xxyy,
+ROG
xxyy xx = Cabinet 01,
yy = slot 01, 03, 05, or 07
Enter the RDTU PCB equipment location as xxyy:
Example: If the RDTU is installed in cabinet shelf 5, slot 3, enter
0503.
Cabinet numbers:
CTX100: Select 01 for Base and Expansion cabinet.
CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
CTX100: Select 01~04 for Base slots and 05~08 for Expansion slots.
CTX670: Select 01~08 for Base slots and 01~10 for Expansion slots.
...or xx = Cabinet 02~07,
yy = slot 01, 03, or 05
315-01 Coding Format
)%
, n,
+ROG
n = 1. None
2. PZC
3. B8ZS (default)
4. ZCS
Select the Coding Format.
315-02 Frame Format
)%
, n,
+ROG
n = 1. None
2. SF mode
3. ESF mode (default)
Select the Frame Format.
315-03 Time Slots n = 1. None
2. 8 Time Slots (default)
3. 16 Time Slots
4. 24 Time Slots
Set the number of Time Slots to be used.
315-04 Receive PAD
)%
, n,
+ROG
,
+ROG
n = 1. None
2. Plus 6 dB
3. Plus 3 dB
4. Zero dB (default)
5. Minus 3 dB
6. Minus 6 dB
7. Minus 9 dB
8. Minus 12 dB
9. Minus 15 dB
Select the Receive PAD values.
315-05 Send Pad
)%
, n,
+ROG
n = 1. None
2. Plus 6 dB
3. Plus 3 dB
4. Zero dB (default)
5. Minus 3 dB
6. Minus 6 dB
7. Minus 9 dB
8. Minus 12 dB
9. Minus 15 dB
Select the Send PAD values.
Programs 316~317
Button Sequence Value(s) Summary
316
Shared D Channel
,
+ROG
The PRI Interface can be extended to include an additional PRI card
to expand the total number of channels to 47 on a Channel Group.
This second PRI may optionally offer a backup D channel.
316-00 Channel Group
n,
+ROG
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
Channel Group Number.
Programs 303~315 (continued)
Button Sequence Value(s) Summary
To Next Page
Loading...
