3Preparing to Work
In this chapter:
n Power up checks
n Software option keys
n Work preparation checks
n Operating hours
n Configuring the machine radio
n Wi-Fi networking
n Exchanging files with a
Connected Community filespace
n Setting depth and slope
increment values
n Selecting an excavator bucket
n Selecting a 3D vertical guidance
method
n Selecting a 2D guidance method
Before you begin work with the GCS900 Grade
Control System, you need to check the state of
the machine and its system components to
ensure the system provides accurate guidance.
This chapter describes how to check the
machine before you turn on the system, what to
look for as the system powers up, and how to
check the general system setup once the system
is running.
GCS900 Grade Control System for Excavators Operator's Manual 45
C H A P T E R
3
To Next Page
Loading...
