3 Preparing to Work
Stopping and resuming synchronization
From the Wireless Data Sync dialog:
l Press Stop to interrupt the file exchange.
l Press Start to resume the file exchange.
3.7.4 Troubleshooting Connected Community file exchange
Use the following table to resolve Connected Community file exchange problems in
the field:
Problem Resolution
Is the wireless communications device
installed correctly?
Check cables and connectors. See your site
supervisor.
Is the wireless communications device
configured to connect to your Internet
service provider?
See your site supervisor.
Is the system configured to use a wireless
communications device?
See your site supervisor.
Is the wireless communications device
connected to the Connected Community?
See your site supervisor.
Does the
Wireless Data Sync
dialog log in
to the Connected Community server?
See
3.7.2 Initiating Connected Community file
exchange from the machine
3.8 Internet Connection Settings
The Internet Connection Settings dialog lets you select how the control box will
connect to the Internet when a connection is not already available. The control box
sends the Access Point Name (APN) settings to the SNM940, instead of having to
set them directly in the SNM940.
1. From the Setup Menu – Installation menu, select Connectivity Settings.
2. Press the up or down arrow keys on the control box to select Internet
Connection Settings and press \::
70 GCS900 Grade Control System for Excavators Operator's Manual
To Next Page
Loading...
