Unipulse F701-C User Manual

7.STATISTICAL AND ACCUMULATION FUNCTION SETTING AND OPERATION
108
2) Sequence control
Operation
1) Select setting mode 2.
2) Set whether the auto accumulation command is ON or OFF. (2-Weighing Function 2)
0
over
under
Time
Tar e
Start
SP1
SP2
SP3
Complete
ON
ON
OFF
ON
ON
ON
ON
ON
Judging Time
Accumulation
Regarding Simple Comparison Control and Sequence Control refer to
"6-2.Simple Comparison Control and Sequence Control" on P.76.
Final － Setpoint 1
Final － Setpoint 2
Final － CPS
Final
Weighing Value
→→→
F
CNG/ENT CNG/ENT
2
LOWER
Accumulation command selection
1 : Auto accumulation command ON
0 : Auto accumulation command OFF
→→ →
ZERO
CNG/ENT CNG/ENT
2
LOWER

Unipulse F701-C Specifications

General

Display	7-segment LED
Units	N, kg, lb
Power Supply	AC 100-240V, 50/60Hz
Interface	RS-232C, RS-485
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C