Unipulse F701-C

3.METHODS OF SETTING
24
3-2-1. Setting Mode 0
In setting mode 0, setting values for final discharging control are to be set.
- Upper Limit
(For details, please refer to "6-6" on P.90.)
- Lower Limit
(For details, please refer to "6-6" on P.90.)
- Near Zero
(For details, please refer to "6-6" on P.90.)
- Set Point 1
(For details, please refer to "6-4" on P.86.)
- Set Point 2
(For details, please refer to "6-4" on P.86.)
- Compensation
(For details, please refer to "6-4" on P.86.)
(0 ~ 99999)
1
UPPER
(0 ~ 99999)
2
LOWER
(0 ~ 99999)
3
NEAR Z .
(0 ~ 99999)
4
SP1
(0 ~ 99999)
5
SP2
(-9999 ~ 9999)
* If negative setting value, display the sign.
6
CPS