17.SPECIFICATIONS
175
17-7. Attachment
AC input cord (3m)........................................................................1
Minus screw driver (For WAGO terminal)....................................1
Control signal Input/Output connector ..........................................1
Connector for BCD output (with BCD option) .............................1
Connector for D/A converter (with D/A converter option) ...........1
Connector for RS-485 (with the RS-485 option)...........................1
Connector for CC-Link (with the CC-Link option).......................1
Operation manual...........................................................................1
Jumper line.....................................................................................2
About the power cable
- The power cable attached to this product as standard equipment can be used in the
AC100V power supply in Japan. (Official ratings voltage AC125V)
Please use the power cable authorized in the country when you use this product
outside Japan.
- Our company sells following resistance pressure cable AC250V (European standard
product) separately.
Please purchase it from us when you need after confirming its plug shape/voltage.
CA325AC3P-CEE7/7-B2 : CEE7/7 Plug cable (2m)
To Next Page
Loading...
Need help?
General
