Unipulse F701-C User Manual

4.CALIBRATION
46
4-4-2. Unit
Register the unit of the scale. The unit can select from t, kg, g, N, lb or None.
Operation
1) Select setting mode 3.
2) Select Unit. (7-Function Selection)
4-4-3. Decimal Place
Set the decimal place for weight-related displays, setting items, etc. Decimal place should be
selected from 0, 0.0, 0.00 or 0.000. This selection results in a common decimal place.
Operation
1) Select setting mode 3.
2) Select a desired decimal place. (7-Function Selection)
→→→
F
CNG/ENT CNG/ENT
3
NEAR Z .
Unit
5 : N 4 : lb
3 : kg 2 : g
1 : t 0 : None
→→
→
ZERO
7
OVER
CNG/ENT
ZERO ZERO
CNG/ENT
ZERO
→→→
F CNG/ENT CNG/ENT
3
NEAR Z .
Decimal place
→→ →
ZERO
7
OVER
CNG/ENTCNG/ENT
ZERO
3 :
2 :
1 :
0 :
In the F701-C, the decimal place is all fixed except for weight-related
descriptions.
* It cannot be changed.

Unipulse F701-C Specifications

General

Brand	Unipulse
Model	F701-C
Category	Accessories
Language	English