Unipulse F701-C

3.METHODS OF SETTING
17
3. METHODS OF SETTING
3-1. Setting Procedure
Change settings in the order of “setting mode selection” → “setting item selection” → “setting
value entry”.
3-1-1. Method of Selecting a Setting Mode
In the text, the method of selecting a setting mode is described as follows:
(Example) For selecting setting mode 3
This operation can be performed by the following procedure.
1) Press the key when the weight value is displayed.
2) Press the key.
→→→
F
CNG/ENT CNG/ENT
3
NEAR Z .
kg
Normally the state is in setting mode 0.
The mode number is not displayed for
mode 0.
Setting mode number
Present weight value
F
kg
,
Setting mode number
The display changes.
,
CNG/ENT
kg
,
Setting mode number
The setting mode number blinks.
,