Unipulse F701-C User Manual

3.METHODS OF SETTING
19
3-1-2. Method of Entering a Setting Value
In the text, the method of entering a setting value is described as follows:
(Example 1) For setting the Balance Weight Value to 50.00kg
(Setting by numerical input: Unsigned)
This operation can be performed by the following procedure.
* However, it is assumed that setting mode 3 has already been selected.
1) Select the setting item.
(Since the setting item number of the Balance Weight Value is 1, press the key.)
2) Press the key.
3) Input the setting value. ( )
4) After the correct setting value is input, press the key to enter the setting value.
→→ →
1
UPPER
CNG/ENT CNG/ENT
1
UPPER
kg
,
Present setting value
The setting mode number, setting
Setting mode number
item number, and present setting
Setting item number
value are displayed.
,
CNG/ENT
kg
,
Present setting value
The highest digit of the setting
Setting mode number
value blinks.
Setting item number
,
0
5
SP2
0
0
0
kg
,
Setting value
Every time a number is pressed,
Setting mode number
the blinking digit moves to the lower one.
Setting item number
Since the highest digit starts blinking again
after a number is input to the lowest digit,
setting can be redone again and again.
,
CNG/ENT
Present weight value
The display returns to the setting
Setting mode number
mode display.
kg

Unipulse F701-C Specifications

General

Brand	Unipulse
Model	F701-C
Category	Accessories
Language	English