Unipulse F701-C User Manual

10.INTERFACE
152
- Write in the set value
* For setting value No., refer to "Setting value communication format" on P.154.
- Read out the set value
* For setting value No., refer to "Setting value communication format" on P.154.
- Zero Calibration
- Span Calibration
Host
F701-C
Ｗ CR
Setting value No. Setting value
LF
* No return data
Host
F701-C
Ｗ
Ｗ
CR
CR
Setting value No.
Setting value
Setting value No.
LF
Host
F701-C
CA
N0 CRA
Calibrating
0: Normally completed, 1 ~ 9 : Error
(same as the error display of F701-C)
CR
LF
Host
F701-C
CB
N0 CRB
Calibrating
0: Normally completed, 1 ~ 9 : Error
(same as the error display of F701-C)
CR
LF
Zero Calibration・Span Calibration
Before sending this command, set the Capacity, Min. Scale division and
Balance Weight Value.
Request

Unipulse F701-C Specifications

General

Brand	Unipulse
Model	F701-C
Category	Accessories
Language	English