TABLE OF CONTENTS
iii
ADVANCED CALIBRATION & SET-UP……………………………………………37
Scale Motion Parameters…………………………………………………………...38
Motion Window Multiplier (Example)…………………………………….38
Motion Settle Time (Example)……………………………………………..39
Zero Scale Parameters……………………………………………………………...40
Power On “Zero Scale” Message………………………………………...40
Push to Zero Window (Zero Range)……………………………………...40
Auto Zero Tracking (On/Off)……………………………………………….40
Auto Zero Tracking Window (AZSM)…………………………………….41
Power On Zero (IZSM)………………...……………………………………41
Disable ZERO key…………………………………………………………...41
Tare Parameters……………………………………………………………………...42
Tare Function Mode…………………………………………………………42
Force Zero For Keyboard Tare……………………………………………42
Auto Tare Clear………………………………………………………………42
Tare Offset…………………………………………………………………….43
Tare Offset Flag……………………………………………………………...43
Scale Channel & Total Mode Parameters………………………………………..44
Enable Scale Channel (Example)…………………………………………44
Power Up Channel Select………………………………………………….45
Enable Total Mode…………………………………………………………..45
More Set-Up Parameters……………………………………………………………46
Power On Units………………………………………………………………46
Scale Overload Setting (Example)………………………………………..46
Power Switch (On/Off key) Bypass………………………………………47
Loadcell Voltage Range……………………………………………………47
Display Update Rate………………………………………………………..48
Scale Over Message………………………………………………………..48
Sound Volume……………………………………………………………….48
Keypress Feedback…………………………………………………………49
Lock Measuring Units (Example)…………………………………………49
To Next Page
Loading...
