Maintenance
4103−2/A1
Winterthur Gas & Diesel Ltd.
1/ 6
Replacing the Crankshaft Gear Wheel
Tools:
1 Ring slugging wrench 94002−60
1 Feeler gauge 94122
1. General
Usually, the crankshaft gear wheel is installed as one part on the crankshaft. If it
becomes necessary to replace a damaged crankshaft gear wheel, it must be divided
into two parts and disassembled. To prevent damage, speak to the engine supplier or
to WinGD to get the applicable instructions to disassemble the crankshaft gear wheel.
The spare crankshaft gear wheel is a two-part assembly.
When you disassemble and assemble the crankshaft gear wheel, you must
disengage the intermediate wheel of the supply unit.
When you order a new two-part crankshaft gear wheel, give the data that follows:
D Engine type
D Engine number
D Engine supplier.
This data is necessary because the two-part crankshaft gear wheel is manufactured
to the specifications and dimensions of the crankshaft related to the engine.
2015
Drive Wheels
To Next Page
Loading...
Need help?
General
