WinGD X72 Maintenance Manual

Summary for Maintenance Manual
(MM)
Page No. Title Subject
Date No.
new exch.
2015 Maintenance Manual, Issue 2015
x
Date of publication 2015
3303-2/A2 2015 EAAD085741 Bottom End Bearing New document for engines with ELBA (New Support 94322A)
x
3303-3/A 2015 EAAD085741 Top End Bearing New document for engines with ELBA (New Support 94322A)
x
Group 3 ToC 2015 EAAD085741 ToC Two Chapters added - 3303-2/A2 and 3303-3/A2
x
9403-5/A1 2015 EAAD085741 Standard Tools Tool 94322A added to page 17
x
Date of publication 2015-03
4325-1/A1 2015-04
Sarting Air Shut-off
Valve
Data changed in pages 3, 5 and 6
x
8447-1/A1 2015-03 EAAD085307 Servo Oil Pipes New pipe grinding tool number. Page 3 Updated
x
Date of publication 2015-04
2722-1/A1 (1) 2015-08 Preliminary work added; set cooling to off x
2722-2/A1 2015-06 EAAD085606 Injection Valve Page 8, Step 8 - Torque angle data changed
x
8447-1/A1 2015-06 EAAD085307 HP Servo Oil Pipe Page 3, Grinding Tool replaced
x
2708/A1 2015-06 EAAD085436
Removal and
Installation of Cylinder
Cover
Page 2 Fig. 2 and Page 5 Fig. 8 replaced (new lifting tool)
x
5556-1/A1 (17) 2015-08 RT-180 better describtion of oil flow check x
5562-3/A1 2015-06 Flow Limiting Valve New maintenance work added
x
9403-5/A1 2015-06
EAAD085436
new drawing
Standard Tools
Page 10, new lifting tool and pretensioner (94215, 94215A);
New tools 94815 Lifting Tool, 94820 Cover added;
x
0380-1/A1 Maintenance Schedule
Now with component lifetime, New data for main bearings,
engine stays, starting air valve, Relief valve, exhaust valve,
Crankshaft, Piston, Starting air shut off valve, Fuel Pump, Flow
limiting valve, Lubricating pump,
x
9308-1/A1 Relief Valve Relocatet Design-Group: former 2745-1
Date of publication 2015-08-12
0002-1/A1 2016-02 Table of contents
iELBA Maintenance Work added (7758-1/A1, 7762-1/A1)
3303-2/A2 and 3303-3/A2 integrated in A1
x
0330-1/A1
(26,27)
2016-02 Clearance table Clearance for Balancer (iELBA) added. x
0380-1/A1 Major update of maintenance schedule x
2751-1/A1 (1) 2016-02 Exhaust Valve Correction of preliminary tasks and illustration x
2751-2/A1 (6) 2016-02 Exhaust Valve Correction shim table x
2303-1/A1 (1, 8-
11)
2016-02 EAAD086068 Piston Rod Gland New procedure 2 (new tool 94235). x
3303-2/A1 2016-02 EAAD085741
Bottom End Bearing
removal
New tool 94322A for iELBA equipped engines x
3303-3/A1 2016-02 EAAD085741
Top End Bearing
removal
New tool 94322A for iELBA equipped engines x
Group7 2016-02 iELBA instructions added x
7758-1/A1 2016 iELBA drive iELBA Maintenance Work added x
7762-1/A1 2016
iELBA proximity
sensors
iELBA Maintenance Work added x
9403-5/A1 (34) 2016-02 EAAD086068 Tool list New Tool: 94235 x
Date of publication 2016-04-06
Manual
Modification Service
Engine Documentation
X72
Modification
Page or
1/3 02/09/2019

WinGD X72 Specifications

General

Brand	WinGD
Model	X72
Category	Engine
Language	English