WinGD X72 Maintenance Manual

Maintenance
3206−1/A1
Winterthur Gas & Diesel Ltd.
3/ 3
3. Elastic Bolts − Apply
Tension
1) Clean the round nuts, the threads of
the elastic bolts and the seating
surfaces.
2) Read the data in 9403−4.
3) Put the pre-tensioning jack (94320,
Fig. 2) in position on the applicable
elastic bolt (1, Fig. 3).
4) Apply tension to the elastic bolts (1) in
the specified sequence shown and in
accordance with the values given in
9304−4, Turning Gear..
5) Apply a protection agent e.g. Valvoline
Tectyl 132 to the bolt threads, round
nuts and the seating surfaces to give
protection against corrosion
2015
Turning Gear: Teeth and Screwed Connections − Check
94320
Fig. 2
I
1
I
SEQUENCE
Fig. 3

WinGD X72 Specifications

General

Brand	WinGD
Model	X72
Category	Engine
Language	English