WinGD X72 Maintenance Manual

Maintenance9403−4/A1
Winterthur Gas & Diesel Ltd.
4/ 4
Table 1 − Hydraulic Jacks − Values and Comparison
Application Group Jack Tightening
Value [bar]
Comparison
[_(, mm]
Reset Jack /
Round Nut
[turns]
Lubricating
Agent 2)
Foundation bolts 1112−1 94145 (1
st
step 1000) 1500 −
¼
MOLYKOTE
paste G
Main bearing 1132−1 94114 1500 −
1¼
Oil
Engine stays 1715−1 94145 170 −
¼
MOLYKOTE
paste G
Tie rods 1903−1 94180 1500 from 100 to 1500 bar
13.5 ... 15.5 mm
3½
MOLYKOTE
paste G
Cylinder cover 2708−2 94215A 1500
495_ 2¼
Oil
Exhaust valve
cage
2751−1 94252 1500
165_ 1
Oil
Turning gear 3206−1 94320 (1
st
step 600) 1500
− ½
Oil
Top con rod 3303−1 94315 (1
st
step 1100) 1500
1
st
to 2
nd
step 15_ ½
Oil
Bottom con rod 3303−1 94252 (1
st
step 700) 1500
1
st
to 2
nd
step 65_
1 Oil
Piston rod foot 3403−1 94340 (1
st
step 1000) 1500
1
st
to 2
nd
step 20_ ½
Oil
Piston head 3403−3 94340 1500
75_ ½
Oil
Bearing, supply
unit
5581−1 94557 1500 −
½
Oil
Roller lifting tool,
supply unit
5556−2
1)
94430A 1500
84_ ½
No lubricant
1)
For cutting out and cutting in a fuel pump, refer to the Operation Manual
5556−2.
2)
For lubrication on threads and contact surfaces.
Hydraulic Pre-tensioning Jacks: General Instructions
2019−09

WinGD X72 Specifications

General

Brand	WinGD
Model	X72
Category	Engine
Language	English