To Next Page

To Previous Page

Maintenance

7218−1/A1

Winterthur Gas & Diesel Ltd.

1/ 6

Cylinder Lubrication System

1. Cylinder Lubricating System 1.......................................

1.1 Cylinder Lubricating System − Operate 1.......................

1.2 Function Check 3.............................................

2. Flex Lube Pump 3..................................................

2.1 Checks 3.....................................................

2.2 Manual Release − One Lube Pulse 3............................

3. Cylinder Lubricating System − Bleed 4...............................

3.1 Flex Lube Pump 4.............................................

3.2 Oil Pipes 4...................................................

4. Duplex Filter 5......................................................

4.1 Clogged Filter Element − Replace 5............................

4.2 Filter Element − Clean 5.......................................

1. Cylinder Lubricating System

For more data about the cylinder lubricating system, see Operation Manual, 7218-1.

1.1 Cylinder Lubricating System − Operate

For more data, see Operation Manual, 4002-2, paragraph 3.2 and paragraph 3.8.

1) In the LDU-20, get the MAIN page.

2) In the navigation menu, select Cylinder Lubrication.

3) In the CYL. LUBRICATION page, field Manual lub. to Cyl. #, select the applicable

cylinder number.

Note: If necessary, change the number of lube pulses (in the range 0 to 200) in

the field # of Manual Lub. Pulses.

Note: As an alternative, you can operate manually the 4/2-way solenoid valve (4,

Fig. 1). For more data, see paragraph 2.2.

2015

WinGD X72 Maintenance Manual

Other manuals for WinGD X72