WTI TSM Series User Manual

6-5
Reboot Options
6.2. Scheduled Reboot
The Scheduled Reboot feature can be used to reboot one or more outlets according
to a user-defined schedule, or to automatically turn outlets Off and then On according
to a user defined schedule. In order to configure a Scheduled Reboot, you must
access command mode using a password that permits access to Administrator level
commands.
Note:PowerswitchingandrebootfunctionsareonlyavailableonRSM-8R8
Seriesunits.Powerswitchingandrebootfunctionsarenotsupportedon
standardTSMSeriesunitsorstandardRSMSeriesunits.
In the Text Interface, the Scheduled Reboot configuration menu is accessed via the
Reboot Options menu (/RB). In the Web Browser Interface, the Scheduled Reboot
configuration menu is accessed via the Reboot Options link. The Scheduled Reboot
configuration menu can be used to Add, Modify, View or Delete Scheduled Reboot
functions.
Note:AfteryouhavefinisheddefiningoreditingScheduledReboot
parameters,makecertaintosavethechangesbeforeproceeding.Inthe
WebBrowserInterface,clickonthe"AddScheduledReboot"buttontosave
parameters;intheTextInterface,pressthe[Esc]keyseveraltimesuntilthe
RSM-8R8Seriesunitdisplaysthe"SavingConfiguration"messageandthe
cursorreturnstothecommandprompt.
6.2.1. Adding Scheduled Reboots
RSM-8R8 Series units allow up to 54 Scheduled Reboots to be defined. The Add
Scheduled Reboot menu allows you to define the following parameters for each new
Scheduled Reboot.
• ScheduledRebootName: Assigns a name to this Scheduled Reboot.
(Default = undefined)
• PlugAction: Determines whether the Scheduled Reboot will result in the outlet(s)
being switched Off, or cycled Off and then On again (Reboot.) Note that when "Off"
is selected, the "Day On" option and the "Time On" option can be used to select a
time and day when the outlet(s) will be switched back On again.
(Default = Turn Off)
• Time: Determines the time of the day that this Scheduled Reboot will occur on.
(Default = 12:00)
• DayAccess: This prompt provides access to a submenu which is used to
determine which day(s) of the week this Scheduled Reboot will be performed. The
Day Access parameter can also be used to schedule a daily reboot; to schedule
a daily reboot, use the Day Access submenu to select every day of the week.
(Default = undefined)
Note:IfyouwishtoScheduleanRSM-8R8SeriesunittoswitchanoutletOn
atonetimeandthenswitchtheoutletOffatanothertime,youmustdefinetwo
separatescheduledactions.Thefirstactionwouldbeusedtoswitchtheoutlet
On,andthesecondactionwouldbeusedtoswitchtheoutletOff.

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English