WTI TSM Series User Manual

8-3
The Status Screens
8.4. The Port and Plug Status Screens (RSM-8R8 Series Units Only)
The Port Status screen and Plug Status screen show the status of the RSM-8R8 Series
unit's serial ports and switched plugs. The Port Status screen lists the user-defined port
name and port mode for each serial port, as well as the buffer count, connection status
and the names of any user's currently accessing these ports. The Plug Status screen
shows the On/Off status of the switched outlets, and lists user-defined Plug Names,
Boot/Sequence Delay values, and Default On/Off settings.
Note:
• InstandardTSMSeriesunitsandstandardRSMSeriesunits,PlugStatusis
notlisted.Instead,standardTSMSeriesunitsandstandardRSMSeriesunits
listonlythePortStatus,asdescribedinSection8.3.
• IntheTextInterface,PortandPlugstatusisshownonasinglescreen.When
the/Scommandisinvoked,thePortStatusScreenwillbedisplayedfirst;
press[Enter]todisplaythePlugStatusScreen.
• IntheWebBrowserInterface,PortandPlugstatusisshownontwoseparate
screens.
• WhenPortStatusandPlugStatusisviewedbyanaccountwithAdministrator
orSuperUsercommandaccess,allRSM-8R8Seriesunitserialportsand
plugsarelisted.WhenPortStatusandPlugStatusisviewedbyanaccount
withUserorViewOnlycommandaccess,thenthescreenwilllistonlythe
serialportsandswitchedoutletsthatareallowedbythataccount.
• ThePortandPlugStatusscreensalsodisplaythecurrenttemperature
readingfortheRSM-8R8Seriesunit.
• ThePlugStatusscreenalsoshowsthestatusoftheRSM-8R8Seriesunit's
InternalModemPort.
To display the Port and Plug Status Screen via the Text Interface, type /S and press
[Enter]. To display the Port and Plug Status Screen via the Web Browser Interface, click
on the "Port Status" link.
Note that when the /S command is invoked, the command line can also include
arguments that display On/Off status for an individual outlet, two or more specific
outlets, or a range of outlets:
/S Displays configuration details and ON/Off status for all switched outlets.
/S s Displays On/Off status for an individual outlet, where s is the name or
number of the desired outlet.
/S s+s Displays On/Off status for two or more specific outlets, where s is the
number or name of each desired outlet. A plus sign (+) is entered between
each outlet number or name.
/S s:s Displays On/Off status for a range of outlets, where s is the number or name
of the outlet at the beginning and end of the range of desired outlets. A
colon (:) is entered between the two outlet numbers or names that mark the
beginning of the range and the end of the range.

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English