9-6
Operation
9.1.1.3. ThePortControlScreen-WebBrowserInterface
In the Web Browser Interface, the Port Control Screen can be used to disconnect
TSM/RSM serial ports that have been connected using the /C command in the Text
Interface as described in Section 9.1.1.1.
To disconnect ports using the Port Control Screen, first access the TSM/RSM Command
Mode via the Web Browser Interface as described in Section 5.1. Click on the "Port
Control" link on the left hand side of the screen to display the Port Control Screen.
When the Port Control Screen appears, click the down arrow in the "Action" column for
the desired serial port(s), select the "Disconnect" option from the dropdown menu for
and then click on the "Confirm Port Actions" button.
When the "Confirm Port Actions" button is pressed, the TSM/RSM will display a screen
which lists the selected action(s) and asks for confirmation before proceeding. To
implement the selected port action(s), click on the "Execute Port Actions" button. After
a brief pause, the TSM/RSM will display the Port Status Screen, confirming that the
selected ports have been disconnected.
Notes:
• WhenthePortControlScreenisdisplayedbyanaccountthatpermits
AdministratororSuperUsercommandaccess,allTSM/RSMSerialPortswill
bedisplayed.
• WhenthePortControlScreenisdisplayedbyanaccountthatpermitsUseror
ViewOnlylevelcommands,thescreenwillonlyincludetheTSM/RSMSerial
Portsthatareallowedbytheaccount.
To Next Page
Loading...
Need help?
General
