WTI TSM Series User Manual

5-29
Basic Configuration
5.6.3. Modifying Plug Groups
Note: PowercontrolfunctionsareonlyavailableonRSM-8R8Seriesunits.
ThePlugGroupDirectoryisnotpresentonstandardTSMSeriesunitsand
standardRSMSeriesunits.
The "Modify Plug Group" function allows you to edit existing Plug Groups in order
to change plug access rights. Note that this function is only available when you
have accessed command mode using a password that permits Administrator Level
commands. Once you have accessed the Modify Plug Group menu, use the menu
options to redefine parameters in the same manner that is used for the Add Plug Group
menu, as discussed in Section 5.6.2.
Note:Afteryouhavefinishedchangingoreditingparameters,makecertain
tosavethechangesbeforeproceeding.IntheWebBrowserInterface,click
onthe"ModifyPlugGroups"buttontosaveparameters;intheTextInterface,
pressthe[Esc]keyseveraltimesuntiltheTSM/RSMdisplaysthe"Saving
Configuration"messageandthecursorreturnstothecommandprompt.
5.6.4. Deleting Plug Groups
Note: PowercontrolfunctionsareonlyavailableonRSM-8R8Seriesunits.
ThePlugGroupDirectoryisnotpresentonstandardTSMSeriesunitsand
standardRSMSeriesunits.
This function is used to delete individual Plug Groups. Note that this function is only
available when you have accessed command mode using a password that permits
Administrator Level commands.
Note:Deletedaccountscannotbeautomaticallyrestored.

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English