WTI TSM Series - Viewing Ping-No-Answer Reboot Profiles; Modifying Ping-No-Answer Reboot Profiles; Deleting Ping-No-Answer Reboot Profiles

6-4
Reboot Options
• PingTest: Sends a test Ping command to the IP Address or domain name that has
been defined for this Ping-No-Answer Reboot.
Notes:
• InorderforthePingTestfunctiontoworkproperly,yournetworkand/or
firewallaswellasthedeviceatthetargetIPaddressmustbeconfiguredto
allowpingcommands.
• AfteryouhavefinisheddefiningoreditingPing-No-AnswerReboot
parameters,makecertaintosavethechangesbeforeproceeding.Inthe
WebBrowserInterface,clickonthe"AddPingNoAnswer"buttontosave
parameters;intheTextInterface,pressthe[Esc]keyseveraltimesuntilthe
RSM-8R8Seriesunitdisplaysthe"SavingConfiguration"messageandthe
cursorreturnstothecommandprompt.
6.1.2. Viewing Ping-No-Answer Reboot Profiles
After you have defined one or more Ping-No-Answer Reboot profiles, you can review the
parameters selected for each profile using the View Ping-No-Answer feature. In order to
view the configuration of an existing Ping-No-Answer profile, you must access command
mode using a password that allows Administrator level commands and then use the
Ping-No-Answer menu's "View/Modify Ping-No-Answer" function.
6.1.3. Modifying Ping-No-Answer Reboot Profiles
After you have defined a Ping-No-Answer profile, you can modify the configuration of the
profile using the Modify Ping-No-Answer feature. In order to modify the configuration
of an existing Ping-No-Answer profile, you must access the command mode using a
password that allows Administrator level commands and then use the Ping-No-Answer
menu's "View/Modify Ping-No-Answer" function.
RSM-8R8 Series units will display a screen which allows you to modify parameters for
the selected Ping-No-Answer Reboot Profile. Note that this screen functions identically
to the Add Ping-No-Answer Reboot menu, as discussed in Section 6.1.1.
Note:AfteryouhavefinisheddefiningoreditingPing-No-AnswerReboot
parameters,makecertaintosavethechangesbeforeproceeding.Inthe
WebBrowserInterface,clickonthe"ChangePingNoAnswer"buttontosave
parameters;intheTextInterface,pressthe[Esc]keyseveraltimesuntilthe
RSM-8R8Seriesunitdisplaysthe"SavingConfiguration"messageandthe
cursorreturnstothecommandprompt.
6.1.4. Deleting Ping-No-Answer Reboot Profiles
After you have defined one or more Ping-No-Answer profiles, you can delete profiles
that are no longer needed using the Delete Ping-No-Answer feature. In order to delete
an existing Ping-No-Answer profile, you must access the command mode using a
password that allows Administrator level commands and then use the Ping-No-Answer
menu's "Delete Ping-No-Answer" function.