WTI TSM Series User Manual

Apx-2
Appendices
A.2. RSM-8R8 Series Units
PowerInput/Output:
Voltage: 100 - 120 VAC, 50/60 Hz or 208 - 240 VAC, 50/60 Hz
ACInputFeed:20 Amps Max. Input Feed per Inlet
ACInlets: Two (2) IEC320-C20
ACOutlets:
RSM-8R8-1Series: 8 each, NEMA 5-15R Outlets
RSM-8R8-2Series: 8 each, IEC320-C13 Outlets
RS232PortInterface:
Connectors: Eight (8) RJ45 connectors (DTE pinout.)
Coding: 7/8 bits, Even, Odd, No Parity, 1, 2 Stop Bits.
FlowControl: XON/XOFF, RTS/CTS, Both, or None.
DataRate: 300 to 115.2K bps (all standard rates).
InternalModem: V.34
Physical/Environmental:
Width: 19” (48.3 cm) (Including Rack Brackets)
Depth: 8.75” (22.2 cm)
Height: 1.75” (4.5 cm) One Rack U
OperatingTemperature: 32˚F to 122˚F (0˚C to 50˚C)
Humidity: 10 - 90% RH
AgencyApprovals: FCC, UL, CE (240 VAC Units)
Venting: Side vents are used to dissipate heat generated within the unit. When mounting the
unit in an equipment rack, make certain to allow adequate clearance for venting.
ControlPorts:
EthernetPort: 100Base-T (RSM-8R8-DE Series Units include Dual 100Base-T Ethernet Ports.)
InternalModemPort(PhoneLine): RJ11 connector for connection to your telco line

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English