WTI TSM Series User Manual

8-2
The Status Screens
8.3. The Port Status Screen
The Port Status screen shows the current status of the Serial Ports, including the user-
defined port name and port mode for each Serial Port, as well as the buffer count,
connection status and the names of any user's currently accessing these ports.
Note:
• InRSM-8R8Seriesunits,thePortStatusScreeniscombinedwithascreen
thatlistsPlug(Outlet)StatusasdescribedinSection8.4.
• WhenPortStatusisviewedbyanaccountwith"Administrator"or"SuperUser"
commandaccess,allTSM/RSMSerialPortsarelisted.
• WhenPortStatusisviewedbyanaccountwith"User"or"ViewOnly"
commandaccess,thenthescreenwilllistonlytheSerialPortsthatare
allowedbythataccount.
• ThePortStatusScreenalsoshowsthecurrentstatusoftheTSM/RSM's
InternalModemPort.
To view the Port Status Screen via the Text Interface, type /S and press [Enter]. To view
the Port Status Screen via the Web Browser Interface, Click on the "Port Status" link on
the left hand side of the screen.
Notes:
• OnTSM-8Series,RSM-8SeriesandRSM-8R8Seriesunits,Port9isthe
InternalModemPort.
• OnRSM-16Seriesunits,Port17istheInternalModemPort.
• OnTSM-24Seriesunits,Port25istheInternalModemPort.
• OnTSM-40Seriesunits,Port41istheInternalModemPort.
• TheModemPortisnotpresentonTSMmodelsthatendwiththe"NMI"suffix.

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English