WTI TSM Series - The Plug Group Status Screen (RSM-8 R8 Series Units Only)

8-4
The Status Screens
8.5. The Plug Group Status Screen (RSM-8R8 Series Units Only)
The Plug Group Status screen shows the configuration details and On/Off status for the
RSM-8R8 Series unit's user-defined Plug Groups.
Notes:
• ThePlugGroupStatusScreenisnotincludedonstandardTSMSeriesunits
andstandardRSMSeriesunits.
• WhenthePlugGroupStatusScreenisviewedbyanaccountwith
AdministratororSuperUsercommandaccess,allplugsandpluggroupscan
beshown.WhenthePlugStatusScreenisviewedbyanaccountwithUser
orViewOnlycommandaccess,thentheunitwillonlydisplaytheplugsand
pluggroupsthatareallowedbythataccount.
• Theprocedurefordefiningparametersforindividualplugsisdescribed
inSection5.7.TheprocedurefordefiningPlugGroupsisdescribedin
Section5.6.
• InordertodisplaythePlugGroupStatusscreen,youmustfirstdefineatleast
onePlugGroupasdescribedinSection5.6.
To display the Plug Group Status Screen via the Text Interface, type /SG and then
press [Enter]. To display the Plug Group Status Screen via the Web Browser Interface,
click on the "Plug Group Status" link and then select the desired Plug Group from the
resulting subment and click on the "Get Plug Group Status" button.
Note:TheSNMPIndexitem(TextInterfaceOnly)liststhepermanentreference
numberthattheRSM-8R8assignstoeachPlugGroup.TheSNMPIndex
numberallowsMIBcommandstobeaddressedtoaspecificPlugGroup.The
SNMPIndexnumberwillnotchangewhenotherPlugGroupsaredeletedor
created.