17-3
Command Reference Guide
17.3. Command Set
This Section provides information on all Text Interface commands, sorted by
functionality
17.3.1. Display Commands
/S Display Port (and Plug) Status Screen
Displays the Port and Plug Status Screen, which lists the current status of the
TSM/RSM's serial ports and switched outlets. For more information, please refer to
Section 8.3 and Section 8.4.
Notes:
• RSM-8R8SeriesUnitswillalsodisplayplug(outlet)status.Powercontrol
andpowerstatusfunctionsarenotavailableonstandardTSMSeriesor
standardRSMseriesunits.
• InAdministratorModeandSuperUserMode,allTSM/RSMoutletsare
displayed.InUserModeandViewOnlyMode,thePlugStatusScreenwill
onlyincludetheplugsallowedbyyouraccount.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /S [Enter]
/SD Display Port Diagnostics
Provides detailed information regarding the status of each port. When this command is
issued by a User level or View Only level account, the resulting screen will only display
parameters for the ports allowed by the account. For more information, please refer to
Section 8.10.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /SD [Enter]
Response: Displays Port Diagnostics Screen.
/W Display Port Parameters (Who)
Displays configuration information for an individual port, but does not allow parameters
to be changed. User and ViewOnly accounts can only display parameters for their
resident port. For more information, please refer to Section 8.12.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /W [x] [Enter]
Where x is the port number or name. To display parameters for the Network Port,
enter an "N". If the "x" argument is omitted, parameters for your resident port will be
displayed.
Example: To display parameters for a port named "SERVER", access the Command
Mode from a port and account that permits Administrator level commands, and
type /W SERVER [Enter].
To Next Page
Loading...
Need help?
General
