WTI TSM Series User Manual

9-19
Operation
9.4.2. Initiating a Telnet Session via the Web Browser Interface
To initiate a Telnet Session from the TSM/RSM Web Browser Interface, proceed as
follows:
1. Place the cursor over the "SSH/Telnet Connect" button on the left hand side of the
screen. When the flyout menu appears, click on the Telnet option.
Note:IftheRSPdisplaysamessagethatindicatesthatyourbrowserdoesnot
includetheJavaplugin,gototheJavawebsiteanddownloadthelatestversion
oftheJavaplugin.
2. Log in to the Telnet Session:
a) The TSM/RSM will display the "login" prompt. Key in a valid username that
has been previously defined via the TSM/RSM User directory and then press
[Enter].
b) The TSM/RSM will display the "password" prompt. Key in the valid password
for the username entered above and then press [Enter].
Notes:
• Theusernameenteredmustbeavalidusernamethathasbeenpreviously
definedviatheTSM/RSMUserDirectoryasdescribedinSection5.5.
• TheIPAddress(hostname)caneitherbetheaddresstothemachinethat
youarecurrentlycommunicatingwithviatheWebBrowserInterface,or
youcanentertheIPaddressforanotherTSM/RSMunit,providingthatthe
usernameenteredispresentontheotherTSM/RSMunittoo.
3. The TSM/RSM will display the Circuit Status Screen, followed by the command
prompt. You may now invoke TSM/RSM commands as described in Section 17.
4. To terminate the Telnet Session, type /X and press [Enter].

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English