To Next Page

To Previous Page

5-69

Basic Configuration

5.9.11. Email Messaging Parameters

The Email Messaging menu is used to define parameters for email messages that the

TSM/RSM can send to notify you when an alarm is triggered. To define email message

parameters, access the TSM/RSM Command Mode using a password that permits

access to Administrator Level commands and then proceed as follows:

• TextInterface: Type /N (for IPv4 parameters) or /N6 (for IPv6 parameters) and

press [Enter] to access the Network Configuration Menu. Key in the number for the

Email Messaging option and press [Enter] to display the Email Messaging Menu.

• WebBrowserInterface: Place the cursor over the "Network Configuration" link on

the left hand side of the screen. When the fly-out menu appears select either the

link for IPv4 parameters or IPv6 parameters to display the Email Messaging Menu.

The Email Configuration menu offers the following options:

• Enable: Enables/Disables the Email Messaging feature. When disabled, the

TSM/RSM will not be able to send email messages when an alarm is generated.

(Default = Off)

• SMTPServer: This prompt is used to define the address of your SMTP Email

server. (Default = undefined)

• PortNumber: Selects the TCP/IP port number that will be used for email

connections. (Default = 25)

• Domain: The domain name for your email server. (Default = undefined)

Note:Inordertousedomainnames,youmustfirstdefineDomainName

ServerparametersasdescribedinSection5.9.5.

• UserName: The User Name that will be entered when logging into your email

server. (Default = undefined)

• Password: The password that will be used when logging into your email server.

(Default = undefined)

• AuthType: The Authentication type; the TSM/RSM allows you to select None,

Plain, Login, or CRAM-MD5 Authentication. (Default = None)

• FromName: The name that will appear in the "From" field in email sent by the

TSM/RSM. (Default = undefined)

• FromAddress: The email address that will appear in the "From" field in email sent

by the TSM/RSM. (Default = undefined)

• ToAddress: The address(es) that will receive email messages generated by the

TSM/RSM. Note that up to three "To" addresses may be defined, and that when

Alarm Configuration parameters are selected as described in Section 7, you

may then designate these addresses as recipients for email messages that are

generated by the alarms. (Default = undefined)

• SendTestEmail: Sends a test email, using the parameters that are currently

defined for the Email configuration menu.

WTI TSM Series User Manual

Questions and Answers: