WTI TSM Series - RSM Series DB9 M Serial Ports

Apx-5
Appendices
B.3. RSM Series DB9M Serial Ports
When connecting Devices to RSM Series DB9M Serial Console Ports, please refer to
Figure B.2 and the table below:
Target Device End Adapter Cable Adapter WTI Device
End
RJSerialConsole
Ports: Cisco Routers,
Juniper Routers and
Other Network Devices
with RJ45 Serial Console
Port
(None Required) RJ45 Straight Cable:
RJX-7 (7 Feet)
RJX-15 (15 Feet)
RJX-25 (25 Feet)
RJX-50 (50 Feet)
DX9F-DTE-RJ
Snap Adapter
WTI RSM Series
DB9M, DTE
Serial Console
Port
(None Required) DX9F-DTE-RJC
Rollover Cable for
Cisco, Sun
(None Required)
DB9MSerialConsole
Ports:Linux PC or Liinux
Laptop, WTI RSM Series
Units, WTI MPC SEries
Units and Other Devices
with a DB9M Serial
Console Port
DX9F-NULL-RJ
Snap Adapter
RJ45 Straight Cable:
RJX-7 (7 ft.)
RJX-15 (15 ft.)
RJX-25 (25 ft.)
RJX-50 (50 ft.)
DX9F-DTE-RJ
Snap Adapter
(None Required) DB9 Null Cable (None Required)
DB25FSerialConsole
Ports:Terminal/DTE
and Other Devices with
DB25F Serial Console
Port
DX25M-DTE-RJ
Snap Adapter
RJ45 Straight Cable:
RJX-7 (7 ft.)
RJX-15 (15 ft.)
RJX-25 (25 ft.)
RJX-50 (50 ft.)
DX9F-NULL-RJ
Snap Adapter
(None Required) DB25M to DB9F
Null Cable
(None Required)