WTI TSM Series User Manual

5-22
Basic Configuration
5.4.3. Granting Plug Access (RSM-8R8 Series Units Only)
Each account can be granted access to a different selection of switched power outlets
(plugs) and plug groups. When accounts are created, the Plug Access parameter and
the Plug Group Access parameter in the Add User menu or Modify User menu can be
used to grant or deny access to each plug or plug group by that account.
Note:PowerswitchingfunctionsareonlyavailableonRSM-8R8Seriesunits.
PowercontrolfunctionsarenotpresentonstandardTSMSeriesandRSM
Seriesunits.
In addition, each command access level also restricts the plugs and plug groups that
the account will be allowed to access:
• Administrator: Accounts with Administrator access are always allowed to control
all plugs and plug groups. Plug access cannot be disabled for Administrator level
accounts.
• SuperUser: SuperUser accounts allow access to all plugs and plug groups by
default. Plug access cannot be disabled for SuperUser level accounts.
• User: Accounts with User level access are only allowed to issue switching and
reboot commands to the plugs and plug groups that have been specifically
permitted via the "Plug Access" parameter in the Add User and Modify User menus.
• ViewOnly: Accounts with ViewOnly access are not allowed to issue switching
and reboot commands to outlets or plug groups. ViewOnly accounts can display
the status of plugs and plug groups, but are limited to the plugs and plug groups
specified by the account.

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English