To Next Page

To Previous Page

5-28

Basic Configuration

5.6.1. Viewing Plug Groups

Note: PowercontrolfunctionsareonlyavailableonRSM-8R8Seriesunits.

ThePlugGroupDirectoryisnotpresentonstandardTSMSeriesunitsand

standardRSMSeriesunits.

The "View Plug Group Directory" option allows you to view the configuration of each

Plug Group. Note that the View Plug Group Directory function is only available when

you have accessed command mode using a password that permits Administrator Level

commands.

5.6.2. Adding Plug Groups

Note: PowercontrolfunctionsareonlyavailableonRSM-8R8Seriesunits.

ThePlugGroupDirectoryisnotpresentonstandardTSMSeriesunitsand

standardRSMSeriesunits.

The "Add Plug Group to Directory" option allows you to create new Plug Groups and

assign plug access rights to each group. Note that the Add Plug Group function is only

available when you have accessed command mode using a password that permits

Administrator Level commands. The Add Plug Group Menu can be used to define the

following parameters for each new account:

• PlugGroupName: Assigns a name to the Plug Group. (Default = undefined)

• PlugAccess: Determines which plugs this Plug Group will be allowed to control.

(Default = undefined)

Notes:

• IntheTextInterface,PlugAccessisconfiguredbyselectingitem2andthen

selectingthedesiredplugsfromtheresultingsubmenu.

• IntheWebBrowserInterface,PlugAccessisconfiguredbyselectingthe

desiredplugsfromalistofallplugsintheAddPlugGroupmenu.

• AfteryouhavefinisheddefiningoreditingPlugGroupparameters,make

certaintosavethechangesbeforeproceeding.IntheWebBrowser

Interface,clickonthe"AddPlugGroup"buttontosaveparameters;inthe

TextInterface,pressthe[Esc]keyseveraltimesuntiltheTSM/RSMdisplays

the"SavingConfiguration"messageandthecursorreturnstothecommand

prompt.

WTI TSM Series User Manual

Questions and Answers: