To Next Page

To Previous Page

5-14

Basic Configuration

5.3.3.2. TheTemperatureLog

The System Parameters menu allows you to either enable or disable the Temperature

Log. When the Temperature Log is disabled, the TSM/RSM will not log temperature

readings. In the default state, the Temperature Log is enabled.

Note:InRSM-8R8-CMseriesunits,theTemperatureLogdisplayedasapartof

theCurrentMeteringLogasdescribedinSection8.6.

5.3.3.3. Reading,DownloadingandErasingLogs

To read or download the status logs, proceed as follows:

• TextInterface: Type /L and press [Enter] to access the Display Log menu. Key in

the number for the desired option, press [Enter], and then follow the instructions in

the resulting submenu.

• WebBrowserInterface: Move the cursor over the "Logs" link on the left hand side

of the screen. When the flyout menu appears, click on the desired "Download" or

"Display" option.

To erase log data, access command mode via the Text Interface, using an account that

permits Administrator level commands, then type /L and press [Enter] to access the

Display Logs menu and proceed as follows:

• AuditLog: At the Display Logs menu, key in the number for the Audit Log option

and press [Enter]. When the Audit Log menu appears, key in the number for the

Erase function, press [Enter] and follow the instructions in the resulting submenu.

• AlarmLog: At the Display Logs menu, key in the number for the Alarm Log option

and press [Enter]. When the Alarm Log menu appears, key in the number for the

Erase function, press [Enter] and follow the instructions in the resulting submenu.

• TemperatureLog: At the Display Logs menu, key in the number for the

Temperature Log option and press [Enter]. When the Temperature Log menu

appears, key in the number for the Erase function, press [Enter] and follow the

instructions in the resulting submenu.

Notes:

• TheTSM/RSMdedicatesafixedamountofinternalmemoryforAuditLog

records,andiflogrecordsareallowedtoaccumulateuntilthismemory

isfilled,memorywilleventually"wraparound,"andolderrecordswillbe

overwrittenbynewerrecords.

• Notethatoncerecordshavebeenerased,theycannotberecovered.

• InRSM-8R8-CMseriesunits,theTemperatureLogdisplayedasapartofthe

CurrentMeteringLog.

WTI TSM Series User Manual

Questions and Answers: