WTI TSM Series User Manual

7-28
Alarm Configuration
• NotifyUponClear: When enabled, the TSM/RSM will send additional notification
when the situation that caused the alarm has been corrected. For example, when
Notify Upon Clear is enabled, the TSM/RSM will send initial notification when it
detects that one of it's power supplies has been lost or disconnected, and then
send a second notification when it determines that power has been restored.
(Default = On)
• EmailMessage: Enables/Disables email notification for this alarm. (Default = On)
• Address1,2,and3: These parameters are used to select which of the three email
addresses defined via the "Email Messages" menu (see Section 5.9.11) will receive
the email alarm notification messages generated by this alarm. The Address
parameters can be used to select one, or any combination of the addresses defined
via the Email Messages menu. (Default = All On)
Note:IfEmailaddresseshavebeenpreviouslyspecified,thenthetextunder
theparameterswilllistthecurrent,userdefinedemailaddresses.
• Subject: This parameter is used to define the text that will appear in the "Subject"
field for all email notification messages generated by this alarm. (Default = "Alarm:
Lost Voltage")

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English