WTI TSM Series User Manual

2-3
Unit Description

RS232SerialPorts: For connection to console ports on target devices. Standard
RJ45 connectors configured as DTE ports. The RS232 ports are similar to a serial
port on a PC. When connecting a modem, use a standard serial cable. When
connecting a PC or other DTE device, please refer to Section 4.5 and Appendix B
and Appendix C.
• TSM-8 series units include 8 Serial Ports.
• TSM-24 series units include 24 Serial Ports.
• TSM-40 series units include 40 Serial Ports.
Ã
NetworkPort: An RJ45 Ethernet port for connection to your 10/100Base-T,
TCP/IP network. Note that the TSM features a default, IPv4 format IP address
(192.168.168.168). This allows you to connect to the unit without first assigning an
IP address. Note that the Network Port also includes two, small LED indicators for
Link and Data Activity. For more information on Network Port configuration, please
refer to Section 5.9.
Note: TSM-DPEseriesunitsincludetwoRJ45Ethernetports.Formore
information,pleaserefertoSection2.3.

PhoneLinePort(InternalModemPort): When the Internal Modem is present, the
phone line port is used for connection to your external phone line.

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English