WTI TSM Series User Manual

10-5
Telnet & SSH Functions
4. RawSocketDirectConnection(withPassword):
a) RSM-8 Series, TSM-8 Series and RSM-8R8 Series units:
• Serial Ports: TCP port numbers 3101 through 3108.
• Internal Modem Port: TCP port number 3109.
b) RSM-16 Series units:
• Serial Ports: TCP port numbers 3101 through 3116.
• Internal Modem Port: TCP port number 3117.
c) TSM-24 Series units:
• Serial Ports: TCP port numbers 3101 through 3124.
• Internal Modem Port: TCP port number 3125.
d) TSM-40 Series units:
• Serial Ports: TCP port numbers 3101 through 3140.
• Internal Modem Port: TCP port number 3141.
5. RawSocketDirectConnection(withoutPassword):
a) RSM-8 Series, TSM-8 Series and RSM-8R8 Series units:
• Serial Ports: TCP port numbers 3301 through 3308.
• Internal Modem Port: TCP port number 3309.
b) RSM-16 Series units:
• Serial Ports: TCP port numbers 3301 through 3316.
• Internal Modem Port: TCP port number 3317.
c) TSM-24 Series units:
• Serial Ports: TCP port numbers 3301 through 3324.
• Internal Modem Port: TCP port number 3325.
d) TSM-40 Series units:
• Serial Ports: TCP port numbers 3301 through 3340.
• Internal Modem Port: TCP port number 3341.
Note:InordertocreateaRawSocketDirectConnection,the"RawSocket
Access"parameterfortheNetworkPortmustbeenabledasdescribedin
Section5.9.2.
When establishing a Direct Connection, the correct TCP port number must be used. If
conditions are acceptable (e.g. Target Port must be free and properly configured), an
immediate connection will be made, with one possible exception; password entry may
first be required depending on configuration settings.
Note:WhenaDirectConnectattemptfailsbecausethePortisbusy,thecallis
rejectedattheTCPlevel.

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English