ii
Warnings and Cautions
Disconnect Power
If any of the following events are noted, immediately disconnect the unit from the outlet
and contact qualified service personnel:
1. If the power cord becomes frayed or damaged.
2. If liquid has been spilled into the device or if the device has been exposed to rain
or water.
Disconnect Power Before Servicing
Before attempting to service or remove this unit, please make certain to disconnect the
power supply cable from the power source.
Two Power Supply Cables
Note that TSM-DPS series units and RSM-8R8 series units feature two separate power
inlets, and a separate power supply cable for each power inlet. Make certain to
disconnect both power supply cables from their power source before attempting to
service or remove the unit.
Modem Cables
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG) UL
Listed or CSA Certified Telecommunication Line Cord.
To Next Page
Loading...