5-12
Basic Configuration
• WebProtection: Enables/Disables and configures the Invalid Access function
for Web connections. When this item is enabled and excessive Invalid Access
Attempts via Web are detected, then the TSM/RSM will lock out the offending
MAC address for the user-defined Web Lockout Duration Period or until the /UL
command is issued. Note that for Web protection, the lockout trigger is a function
of the Web Hit Count parameter and the Web Lockout Duration Parameter.
• LockoutEnable: Enables/Disables Invalid Access Lockout protection for web
connections. (Default = Off)
• WebHitCount: The number of invalid attempts that must occur during the
length of time specified by the Web Lockout Duration period in order to trigger
the Invalid Access Lockout feature for Web access. For example, if the Web Hit
Count parameter is set to 10 and the Web Lockout Duration parameter is set to
30 minutes, then the TSM/RSM will lock out the offending MAC address for 30
minutes when over 10 invalid access attempts occur during any 30 minute long
period. (Default = 80)
• WebLockoutDuration: This option selects both the length of time that a Web
Lockout will remain in effect and also the time period over which invalid access
attempts will be counted. When a Web Lockout occurs, the offending MAC
address will be prevented from establishing a Web connection to the TSM/RSM
for the defined Telnet Lockout Duration period. (Default = 60 Seconds)
To Next Page
Loading...
Need help?
General
