To Next Page

To Previous Page

5-24

Basic Configuration

• PortAccess: Determines which TSM/RSM Serial Ports this account will be allowed

to access. (Defaults; Administrator & SuperUser = All Ports On,

User and ViewOnly = undefined)

Notes:

• AdministratorandSuperUserlevelaccountswillalwayshaveaccesstoall

SerialPorts.

• ViewOnlyaccountsareallowedtodisplaythestatusofSerialPorts,butare

limitedtotheportsspecifiedbytheaccount.ViewOnlyaccountsarenot

allowedtocreateconnectionsbetweenports.

• ThePortAccessparameterisalsousedtograntordenyuseraccesstothe

internalmodemport.

• PlugAccess: (RSM-8R8 Series Units Only) Determines which outlet(s) this

account will be allowed to control. (Defaults; Administrator and SuperUser = All

Plugs On, User and ViewOnly = undefined)

Notes:

• PowerControlfunctionsareonlyavailableonRSM-8R8seriesunits.Power

controlfunctionsarenotpresentonstandardTSMSeriesandRSMSeries

units.

• AdministratorandSuperUserlevelaccountswillalwayshaveaccesstoall

plugs.

• ViewOnlyaccountsareallowedtodisplaytheOn/Offstatusofplugs,butare

limitedtotheplugsspecifiedbytheaccount.ViewOnlyaccountsarenot

allowedtoinvokeswitchingandrebootcommands.

• PlugGroupAccess: (RSM-8R8 Series Units Only) Determines which Plug Groups

this account will be allowed to control. Plug Groups allow you to define a selection

of outlets, and then quickly assign those outlets to new accounts by allowing the

account to access the Plug Group. For more information on Plug Groups, please

refer to Section 5.6. (Default = undefined)

Notes:

• PowerControlfunctionsareonlyavailableonRSM-8R8seriesunits.Power

controlfunctionsarenotpresentonstandardTSMSeriesandRSMSeries

units.

• Inordertousethisfeature,PlugGroupsmustfirstbedefinedasdescribedin

Section5.6.

• AdministratorandSuperUserlevelaccountswillalwayshaveaccesstoall

pluggroups.

• ViewOnlyaccountsareallowedtodisplaytheOn/Offstatusofpluggroups,

butarelimitedtothepluggroupsspecifiedbytheaccount.ViewOnly

accountsarenotallowedtoinvokeswitchingandrebootcommands.

WTI TSM Series User Manual

Questions and Answers: