WTI TSM Series - Page 71

5-42
Basic Configuration
• IPAlias: Assignes an IP address of your choice to the serial port. When an IP
address is assigned to the serial port, this essentially allows users to create a direct
connection to the serial port without first entering a password.
(Default = undefined)
Notes:
• TheIPAliasfeatureisonlyavailablewhentheDirectConnectfeatureissetto
"On-Password"or"On-NoPassword."
• TodisplaytheassignedIPAliasforeachserialportviatheTextInterface,
type/SAandpress[Enter].
• TodisplaytheIPAliasstatusviatheWebBrowserInterface,placethecursor
overthe"PortStatus"linkonthelefthandsideofthescreen,waitforthe
flyoutmenutoappearandthenclickonthe"AliasStatus"link.
• WhendefininganIPAliasforaTSM/RSMunitthatincludesdualEthernet
port,notethattheIPAliasisasharedparameter.TheIPAliasthatisdefinied
forEthernetPort0willalwaysbethesameastheIPAliasthatisdefinedfor
EthernetPort1(andviceversa.)FordualEthernetTSM/RSMunits,youcan
onlydefineoneIPAlias,andthatIPAliaswillbeassignedtobothEthernet
Port0andEthernetPort1.