COMMAND Pages
106
Chapter 4 PLAY Mode
DELETE
Deletes one or more samples (or sample banks) from memory,
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Press the COMMAND key, then turn Knob 1 to select >DELETE.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔ - ✔✔
Push action ✔ ----
Use this page to delete one or more samples from main memory. You can choose to
delete (a) a single sample only, (b) all unused samples only, or (c) all samples.
Important
Deleting a sample will change the sound of any programs or sample banks in which the
sample is used. Before deleting, check to make sure that the sample is not used by
programs and sample banks that you wish to maintain.
Knob 1 Change Page >DELETE
• Turn the knob to change to a different command page.
• Push the knob to delete the sample(s). The A3000 returns a confirmation screen.
Press Knob 5 (>YES) to complete the deletion, or Knob 4 (>NO) to cancel.
• If you select a sample bank for deletion, the A3000 screen will ask whether you want
to also delete all of the samples within that bank. Push Knob 5 (>YES) to delete all
samples together with the bank, or push Knob 4 (>NO) to delete the sample bank
only, while leaving the samples in memory.
Knob 2 Type of Deletion = Smp, AllSmp, FreeSmp
Turn the knob to select whether to delete one sample (or sample bank) only, all samples
and sample banks, or unused samples only.
Smp Delete the single sample or sample bank selected by Knob 4 or
5.
AllSmp Delete all samples and sample banks.
FreeSmp Delete unused samples and sample banks only (all samples and
sample banks that are not associated with any programs).
Knobs 4, 5
Sample =
Name of sample or sample bank
If you are deleting a single sample (or sample bank) only, turn either knob to select the
sample (bank) to be deleted. Note that this item appears only if Type is set to Smp.
To Next Page
Loading...
Need help?
General
