Yamaha A3000 User Manual

Specifications
332
Appendix
Specifications
Tone generation method
AWM2 tone generator
Polyphony
64 notes, 16 multis, layering
Key assignment
Last-note priority, dynamic voice allocation, mono-mode supported
A/D conversion
16 bit delta-sigma type 64-times oversampling
D/A conversion
18 bit 4-times oversampling
Digital I/O (only when AIEB1 I/O expansion board is installed)
Input/output DIGITAL connectors S/P-DIF (coaxial)
OPTICAL connectors S/P-DIF (optical)
Input frequency 48 kHz, 44.1 kHz, 32 kHz
Output frequency 44.1 kHz
Sampling frequency
Analog input 44.1, 22.05, 11.025 kHz, 5.5125 kHz (mono and stereo)
Digital input (only when AIEB1 I/O expansion board is installed)
48 kHz, 44.1 kHz, 32 kHz external synchronized recording (stereo only)
1/2, 1/4 and 1/8 undersampling is supported
Internal sample memory capacity
Standard 2 Mbytes (installed on-board)
Maximum 128 Mbytes
(When four 32 Mbyte 72 pin SIMM modules are installed. The
on-board 2 Mbytes are unused only if memory has been expanded
to the maximum.)

Yamaha A3000 Specifications

General

Sampling Rate	44.1kHz
MIDI	In/Out/Thru
Type	Sampler
Effects	Reverb, Chorus, Delay
Display	LCD
Storage	Floppy disk drive