Yamaha A3000 User Manual

COMMAND Pages
150
Chapter 5 EDIT Mode
NORM (Normalize)
Adjusts waveform to optimal level.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Press the COMMAND key, then turn Knob 1 to select >NORM.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔ ----
Push action ✔ ----
This command adjusts the waveform to its optimal level. Adjustment is made by propor-
tionately raising all levels such that the highest level comes to just below the clip point,
as illustrated below. (The “clip point” is the maximum level appropriate for digital process-
ing.)
Normalize
Important
This command does not operate on sample banks.
Knob 1 Change Page >NORM
• Turn the knob to change to a different command page.
• Push the knob to execute the normalization. The A3000 returns a confirmation screen.
Push Knob 5 (>YES) to proceed, or Knob 4 (>NO) to cancel.

Yamaha A3000 Specifications

General

Sampling Rate	44.1kHz
MIDI	In/Out/Thru
Type	Sampler
Effects	Reverb, Chorus, Delay
Display	LCD
Storage	Floppy disk drive