179
Chapter 5 EDIT Mode
Chapter 5
MAP/OUT Function
MAP/OUT - Expand
Sets the sound’s expansion characteristics.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select Expand.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔✔ -
Push action ✔ ----
Use this page to create a more expansive sound for the sample. This feature makes it
possible to broaden the sound of monaural samples, and to generate wider acoustics for
your stereo samples.
FYI
The expansion settings introduce slight differentials between left-channel and right-
channel playback. These settings impart subtle stereo characteristics to monaural sam-
ples.
Knob 1 Change Page Select P/S
• Turn the knob to change to a different page within the MAP/OUT function. Available
pages are: KeyRnge, VelRnge, Lvl&Mode, Output, Pitch , Expand(this page), and LvlScale.
• Push the knob to move to the Program/Sample Selection screen. (☞95)
Knob 2 Detune = -7,...,+7
This feature sets up a tuning differential (discord) between left and right channels. Posi-
tive values apply the differential in one direction, while negative values apply it in the
other. A setting of 0 switches detuning off.
Knob 3 Dephase = -63,...,+63
This feature sets up a differential in the playback start address for each channel —
resulting in a subtle phase discord. Positive values apply the differential in one direc-
tion, while negative values apply it in the other. A setting of 0 switches dephasing off.
Knob 4 Width = -63,...,+63
This parameter sets the sound’s width. A setting of +63 produces normal positioning
for stereo samples.
To Next Page
Loading...
Need help?
General
