Sample Output Destinations and Effects
78
Chapter 3 Basics
Sample Output Destinations and Effects
Each sample includes output parameters that select the sample’s output destination and effects
usage. The A3000 provides a double-output system (main output and assignable output) and a
triple effect system (three independent effect circuits).
Double Output System
You can output each sample to two different output systems: a main output and an
assignable output. Each system offers five different settings, as follows.
Main Output
off No main output.
Stereo Bypass the effects.
Effect1 Output to Effect 1.
Effect2 Output to Effect 2.
Effect3 Output to Effect 3.
Assignable Output
off No assignable output.
ASL&R Output to assignable output jacks L and R.
AS1&2 Output to assignable output jacks 1 and 2. (Requires optional
AIEB1 board.)
AS3&4 Output to assignable output jacks 3 and 4. (Requires AIEB1
board.)
AS5&6 Output to assignable output jacks 5 and 6. (Requires AIEB1
board.)
DIG&OPT Output to OPTICAL and DIGITAL jacks only. (Requires AIEB1
board.)
To Next Page
Loading...
