Yamaha A3000 - MIDI Function

303
Chapter 8 UTILITY Mode
Chapter 8
SYSTEM Function
SYSTEM - Page
Determines initial function selection, page selection.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select Page.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔✔✔
Push action ✔ ----
This page selects whether the A3000 moves to the “first” or “most recent” function
when you switch the mode; and whether it moves to the “first” or “most recent” page
when you switch the function.
Knob 1 Change Page Select P/S
• Turn the knob to change to a different page within the SYSTEM function. Available
pages are: Keys, Display, Page (this page), and FreeMem.
• Push the knob to move to the Program/Sample Selection screen. (☞95)
Knobs 2, 3 atModeChange = 1stFunction, LastFunction
This setting selects whether the A3000 activates the “first” function or the “last” (most
recent) function when you switch to a different mode.
1stFunction When you switch to a different mode, the A3000 automatically
moves into the function identified by the first (leftmost) func-
tion key.
LastFunction When you switch to a different mode, the A3000 automatically
re-enters the function that was active when you last exited that
mode.
Knobs 4, 5 atFuncChange = 1stPage, LastPage
This setting selects whether the A3000 activates the “first” page or the “last” (most
recent) page when you switch to a different function within the current mode.
1stPage When you change functions (by pressing a function key), the
A3000 automatically displays the initial page for that function.
LastPage When you change functions (by pressing a function key), the
A3000 automatically displays the page that was shown when
you last exited that function.