300
Chapter 8 UTILITY Mode
SYSTEM Function
SYSTEM Function
Use this function to set up the system’s operating environment and screen-display op-
tions, and to check the amount of free memory.
SYSTEM - Keys
Sets the operation of the ASSIGNABLE and AUDITION keys.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select Keys.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔ - ✔
Push action ✔ ----
This page sets the operation of the ASSIGNABLE and AUDITION keys.
Knob 1 Change Page Select P/S
• Turn the knob to change to a different page within the SYSTEM function. Available
pages are: Keys (this page), Display, Page, and FreeMem.
• Push the knob to move to the Program/Sample Selection screen. (☞95)
Knobs 2, 3
ASSIGNABLE = Damp,...,Fkey Play on/off
Turn either knob to select the operation of the ASSIGNABLE key.
Damp Switches off (damps) all sound output.
Controller Reset Resets all control-change values.
Knob Control on/off Switches the knob operation mode. While the ASSIGNABLE
key is engaged (indicator lamp is on), Knobs 2 to 5 operate as
controllers, in accordance with the settings in the KnobSet page
of the PANEL PLAY function (☞292).
Fkey Play on/off Switches the function-key operation mode. While the ASSIGN-
ABLE key is engaged (indicator lamp is on), the function keys
operate as keyboard keys -- transmitting Note On messages in
accordance with the settings in the FKeySet page of the PANEL
PLAY function (☞294).
To Next Page
Loading...
Need help?
General
