Yamaha A3000 User Manual

COMMAND Pages
283
Chapter 8 UTILITY Mode
Chapter 8
DELETE
Deletes one or all sequences from main memory.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Press the COMMAND key, then turn Knob 1 to select >DELETE.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔ - ✔✔
Push action ✔ ----
Use this command to delete one or all sequences from main memory.
Knob 1 Change Page >DELETE
• Turn the knob to change to a different command page.
• Push the knob when you are ready to delete the sequence(s). The A3000 returns a
confirmation screen. Push Knob 5 (>YES) to proceed with the deletion, or Knob 4
(>NO) to cancel.
Knob 2 Type = Seq, AllSeq
Turn the knob to select whether to delete one or all sequences.
Seq Delete the single sequence selected by Knob 4 or 5.
AllSeq Delete all sequences.
Knobs 4, 5 Sequence = sequence name
If you are deleting a single sequence only, turn either knob to select the sequence.

Yamaha A3000 Specifications

General

Sampling Rate	44.1kHz
MIDI	In/Out/Thru
Type	Sampler
Effects	Reverb, Chorus, Delay
Display	LCD
Storage	Floppy disk drive