Sample Editing
52
Chapter 2 Trying It Out
Sample Editing
In this section we will try out further editing on your ahhhh, eeeee, and ohhhh samples.
Using Loops
We will now set up a loop for the ahhhh sample. The sample will then play out continu-
ously when you hold down an appropriate key at the MIDI keyboard.
Procedure
1.
Select EDIT mode, and then select the TRIM/LOOP function.
2.
Press Knob 1, and then turn Knob 2 or Knob 3 to select the Voice AH sample
for editing. Then press Knob 1 again.
3.
Turn Knob 1 to select the WvMode (wave mode) screen.
▼The screen should now look like this.
4.
Turn Knob 2 to set LpMode (loop mode) to –␣ –␣ –␣ → O.
5.
Press and hold the AUDITION key.
You use the AUDITION key to play out the currently selected sample. Notice how the
sound loops: ahhhh, ahhhh, ahhhh. In the next few steps we will adjust the loop start
and end points to produce a smoother loop (ahhh-hhh-hhh).
PLAY
EDIT
REC
DISK
UTILITY
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI