239
Chapter 6 RECORDING Mode
Chapter 6
EFFECT Function
EFFECT - RecEf1,...,RecEf3 (Edit the Effects)
Use this page to edit the recording effects. The page’s appearance and operation varies
according to whether the RecEfEditType value is set to full or favorite (☞240).
■ If “RecEfEditType” is set to “full”, the page appears as follows.
Sets parameters for the selected effect (Effect 1, 2, or 3).
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select RecEf1, RecEf2, or RecEf3.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔✔✔
Push action ✔ ----
• This page is identical to the corresponding page in the PLAY | EFFECT function.
(☞124)
• Available parameters differ for each effect type. For a listing of parameters and their
meanings, refer to the “Effect parameter list” in the Appendix. (☞337)
■ If “RecEfEditType” is set to “favorite”, the page looks like this.
Sets parameters for the selected effect (Effect 1, 2, or 3).
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select RecEf1, RecEf2, or RecEf3.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔✔✔
Push action ✔✔✔✔✔
• This page is identical to the corresponding page in the PLAY | EFFECT function.
(☞125)
• Available parameters differ for each effect type. For a listing of parameters and their
meanings, refer to the “Effect parameter list” in the Appendix. (☞337)